 |
 |
|
Collet Chuck
Collet Chuck
- It's a PUSH type collet are used mainly on turning, CNC, special purpose machines and other, etc.
- High clamping accuracy, high speed and construction of high rigidity.
- The installation is the same as "Thru-hole power chuck" and they are replaceable with each other. No need to change the "Draw tube".
- This is a completely sealed design, which prevents coolant and chips from entering the spindle.
- The collet used must accord with DIN 6343.
- J value is the hole diameter of blank draw nut, K is the maximum thread specification, and it could be customize.
CL (Collet Chuck) 
SPEC.
/
Model |
Plunger stroke mm |
Max. Chucking Capacity mm |
Max. D.B. pull kN(kgf) |
Max. clamping force kN(kgf) |
Max. speed min-1 (r.p.m.) |
I kg.m2 |
Weight kg |
Matching Stell Collet |
Matching cyl. |
Max. pressure Mpa (kgf/cm2) |
| Round |
Hexagon |
Square |
| CL-26 |
4.5 |
3~26 |
4~22 |
4~18 |
17.6(1800) |
37.9(3870) |
8000 |
0.040 |
4.3 |
161E |
TK-533 |
2.6(26) |
| CL-30 |
3~30 |
4~26 |
4~20 |
19.6(2000) |
42.1(4300) |
0.038 |
4.2 |
163E |
2.9(29) |
| CL-36 |
6 |
3~36 |
6~32 |
6~26 |
22.5(2300) |
48.5(4950) |
6000 |
0.062 |
7.0 |
171E |
TK-643 |
2.5(25) |
| CL-42 |
3~42 |
6~36 |
6~29 |
24.5(2500) |
52.9(5400) |
0.060 |
6.9 |
173E |
2.9(29) |
| CL-52 |
5~52 |
8~45 |
7~36 |
27.4(2800) |
59.0(6020) |
0.101 |
14.3 |
177E |
TK-852 |
2.3(23) |
| CL-6017 |
5~60 |
8~52 |
7~42 |
29.4(3000) |
63.7(6500) |
5000 |
0.098 |
14.1 |
185E |
TK-1068 |
1.8(18) |
| CL-6022 |
0.126 |
16.3 |
| CL-80 |
20~80 |
18~69 |
15~56 |
34.3(3500) |
71.5(7300) |
4000 |
0.108 |
17.8 |
193E |
TK-1287 |
1.6(16) |
Page Top
|
| |
Address: No.229, Sec. 1, Ming Sheng Rd., Pu Hsin Hsiang, Chang-Hua Hsien, Taiwan
Tel: 886-4-822-8719 / Fax: 886-4-823-5719
Copyright© Autogrip Machinery Co., Ltd. / Official Website: www.autogrip.com.tw
|
| |
|