Power Chuck, Collet Chuck, Rotary Cylinder

Home > Product Category > Rotary Cylinder > RE-A

Image of Rotary Cylinder - RE-A

For short form, light weight and high speed rotary cylinder. To allow compressed air to be feed from the ear end of the distributor through the rotating union.
Built-in safety check valves, pressure relief valves and proximity sensor.
Can screw it from the rear end of the cylinder when mounting.
The drain port should be independently connected to oil tank to avoid back pressure.
When used, a little oil mist should be contained.

Image of Rotary Cylinder - RE-A

Proximity sensor：Model TLX-12N02E1-C(KFPS)DC 12~24V 200mA NPN

SPEC. / Model	Eff. Piston area cm²		Piston stroke mm	Max. speed min^-1(r.p.m)	Max. pressure Mpa (kgf/cm²)	Air connection max. pressure MPa (kgf/cm²)	I kg.m²	Weight kg
SPEC. / Model	Extend	Retract	Piston stroke mm	Max. speed min^-1(r.p.m)	Max. pressure Mpa (kgf/cm²)	Air connection max. pressure MPa (kgf/cm²)	Moment of inertia	Weight kg
RE-A110	92.7	87.9	20	6000	3.5(35)	0.8(8)	0.02	6.2
RE-A120	110.8	106.0	21		4.0(40)		0.03	7.5
RE-A130	130.4	123.1	30		4.0(40)		0.03	7.9
RE-A150	174.4	160.8	30	5500	4.0(40)	0.8(8)	0.6	14.9
RE-A200K	292.4	274.9	35	5500	4.0(40)		0.19	29.1
RE-A200L	292.4	265.4	50	4000	5.0(50)		0.21	30.4
RE-A250	465.2	438.2	60	2000	5.0(50)		0.43	47.2

Relative Product:

Address: No.229, Sec. 1, Ming Sheng Rd., Pu Hsin Hsiang, Chang-Hua Hsien, Taiwan

Tel: 886-4-822-8719 / Fax: 886-4-823-5719